EN 14126 Standard for COVID-19 Virus Protection

Our previous blog looked at general recommendations for biohazard clothing for use in applications involving the Coronavirus 2019-nCoV. These recommendations are based on understanding the relevant standard of clothing protection against infectious agents within EN 14126.

This partner blog considers the importance of correct interpretation of the EN 14126 standard, and especially of the ISO 16604 test within, for Covid-19 and any other infectious agent protection.

The spread of SARS CoV-2 continues (SARS CoV-2 is the name of the virus; Covid-19 the name of the disease it causes). Quoting statistics and numbers seems pointless; suffice to say it has become a global pandemic affecting every country in the world. It is now increasingly evident that it will continue to be a major factor in all our lives for some time; eradication seems like a pipe-dream and a truly effective vaccine could be months but possibly years away. So it appears management of the disease and minimizing its effect will be an ongoing process of tweaking society with local lock-downs and methods to limit human interactions, and thereby the disease’s ability to transmit, for the foreseeable future. Which means correct understanding of how medical professionals can protect against it using correctly chosen PPE remains a priority.

banner imageWhen we talk about appropriate protection against infectious agents, we must talk about EN 14126.

EN 14126 is the clothing standard for protection against infectious agents. It consists of four tests to assess a fabric’s ability to resist penetration of a bacterial or viral infection via different routes of contamination, such as in a pressurized liquid (such as a body fluid) or on a contaminated surface. For those involved in selecting workwear for such protection, understanding this standard is vital, especially as there is considerable confusion around it. There are four important aspects on which to be clear;

  • What does it test?
  • What does Certification to it tell you and how should it be used?
  • What are the key tests within it?

Clearing up the confusion between the ISO 16603 and ISO 16604 tests.

Each of these is discussed below.

What does the EN 14126 standard test?

The standard contains tests against fabrics only and no testing or certification of finished garments. Garment design for infectious agent protection is addressed in the standards that define EN “Types:”

  • EN 13034 (for Type 6 protection against Aerosol Spray)
  • EN 13982 (for Type 5 protection against hazardous dry particles
  • EN 14605 (for Type 3 and 4 protection against jet and shower-type sprays of liquids. It is these standards that define the garment design requirements.
  • EN 943 (For Type 1 protection against gases and vapors)

Thus garments certified to the Type standards AND EN 14126 will be labelled as meeting “Type 6” or Type 3” and so on, and have the suffix “–b” added. When you see a garment labelled with “Type 6-b” it means the garment construction meets the requirements of Type 6 and the “-b” means it is also certified to EN 141262

What does certification to this standard tell you and how should it be used?

Certification to EN 14126 (see image below) doesn’t explain the type of infectious agent it is suitable to protect against. Viral and bacterial infectious transmit differently and have different routes of contamination. The standard contains for tests, each of which measure the resistance to contamination types. (See table at the end of this blog).

en 14126 pictogram
With this considered, a garment may be certified to EN 14126 but may have been tested to ONLY ONE of the four tests and achieved the lowest classification; or it may have been tested to ALL FOUR of the tests and achieved the highest classification in each. The basic information advising certification on the label will be the same.

Furthermore, if for example a garment has been tested only to ISO 22612, the test against penetration of contaminated dry particles, this would have little relevance to protection against Coronavirus 2019-nCoV. This is because it is primarily transmitted in moisture droplets resulting from coughs and sneezes (though like other cold and flu viruses it can probably also survive on contaminated surfaces) which is dealt with by ISO 22610 (this has now replaced EN 14126:Annex A).

So certification to EN 14126 alone DOES NOT indicate that a garment is suitable for protection against this or any other infectious agent.

To judge whether a garment is suitable for the protection you need, you must:

1) understand the routes of contamination in a particular environment (or relating to a particular infection) and

2) look at the garment’s User Instructions (or data sheet) to discover which tests it has been subjected to and whether they are relevant.

What are the key tests within the standard?

Of the four tests, ISO 16604 is particularly relevant in this (and any viral protection) case.

Each of the four tests uses a medium contaminated with a bacteria type. The table below shows the type in each test, the size of the contaminant used and the known size of Coronavirus 2019-nCoV.

14126 tests contaminant sizes

* Note: This information is taken directly from the EN standard

It can be clearly seen that only the ISO 16604 test uses a contaminant – a bacteriophage (that is, a virus that parasitizes a bacteria by infecting it, in this case Phi X174, selected, according to the standard, for its small size) – that is considerably smaller than the Coronavirus now filling the news. The other tests use bacteria considerably larger than Coronavirus. Thus, ISO 16604 is the only test providing a clear indication of effective resistance to penetration of that size of infectious agent.

In summary, therefore, specifiers of protective clothing should look for garments that are not only certified to EN 14126, but have also achieved a good classification in the ISO 16604 test.

ISO 16604 vs ISO 16603 Differentiators

The EN 14126 standard contains only FOUR tests – not five as some manufacturers suggest. A common claim by some producers and suppliers is that their garment is suitable because it achieves a classification in ISO 16603. This is incorrect; there is no classification in the standard for ISO 16603 test results and ISO 16603 is an inferior test to 16604: it is not intended to indicate any level of protection.

The standard is quite clear about this. Whilst the ISO 16603 test is referenced, it is categorically stated that it is a “pre-cursor” test to be conducted in preparation for ISO 16604.

The key test (ISO 16604) measures the pressure at which “breakthrough” of the medium containing the bacteriophage will occur. To confirm penetration, a culture is grown from any penetrated medium in order to confirm viral penetration.

ISO 16603 exists purely to reduce the work and cost of ISO 16604. To avoid having to test at every pressure until “strike through” is identified, ISO 16603 uses synthetic blood in a simple visual penetration test to estimate the pressure at which strike through is likely to occur in ISO 16604. Testing to ISO 16604 can then proceed at this pressure as a starting point.

However, the 16603 test does not use any contaminants (as do the other tests) and the classification table applies ONLY to the results of ISO 16604. This is clearly confirmed in Clause 4.1.4.1 of the standard.

(In fact – and commonly – products claiming an ISO 16603 classification do so because they fail the ISO 16604 test, so for any garment claiming a classification to 16603, it is worth checking the test result for 16604).


Key requirements for COVID-19 protection garments

In conclusion, those specifying clothing for protection against Coronavirus 2019-nCoV should primarily look for a garment that achieves a high classification in the ISO 16604 test as well as being certified to EN 14126. Do not make the error of assuming that a classification to ISO 16603 is either equivalent or correct as some manufacturers suggest or imply.

In terms of design, garments should also be at least certified to EN 14605 Type 4 which requires sealed seams and a sealable zip cover to minimize the possibility of ingress via those routes. In other words, a garment labelled as Type 4-b.

For more information on garment selection for Coronavirus 2019-nCoV you can read our detailed blog here or download our fact sheet here.

A summary of the tests and classification in EN 14126 is shown below. You can also download a detailed fact-sheet on the standard here

summary of en 14126 classifications

 

Facebook
Twitter
LinkedIn
Print
Email

Related Posts

Keeping-up-with-CE-Standards-in-the-petrochemical-industry
Understanding Different Types of CE Standards

As the number of CE standards increases, so does the rate at which standards are withdrawn and replaced by new...

Gulf Coast Refineries and Hurricane Season
On March 11, 2020, the World Health Organization declared COVID-19 a worldwide pandemic. On August 29, 2021, Hurricane Ida, a...
EN 14126 New Labeling System for Biohazard Clothing

Personal Protective Equipment for protection against biohazards and infectious agents has formed a part of global news headlines with troubling...

What can we help you find?

Find a Location

View Locations

Find a Chemical

Search Chemicals

Find a Download

Document Finder